Graco Fusion Air Purge Spray Foam Gun
The Graco Fusion Air Purge Spray Foam Gun is the Spray Foam Insulation Gun is hands down the most requested gun known to the Spray Foam Industry. The easy tear down and rebuild process makes it the spray foam applicators choice among. In addition the fusion also has many different options such as round pattern and flat pattern. Also Pour tips and extension tips make this Spray Foam Air Purge Gun very versatile. Different pattern sizes can be achieved by changing the mixing chamber size and will control the output of the gun.
Furthermore, Air Purge means that air blows out any residual chemical in the chamber to keep it clean when the trigger is not being pulled.
At the end of the day grease the gun and it is ready for use the next day. Regular inspection of the O-rings and seals will assure this gun is always working properly.
The Graco Fusion AP is a great choice with any of the Graco Spray Foam machines. Explore our Spray Foam Rigs and let a Paratus Tech help you with your selection of spray foam equipment.
|Fusion Plural Component Impingement Mix Air Purge Spray Gun|
|Maximum Fluid Working Pressure||3500 PSI|
|Minimum Air Inlet Pressure||80 PSI|
|Maximum Air Inlet Pressure||130 PSI|
|Air Flow Range||See Chart in Instruction Manual|
|Typical Flow Rate of Round Pattern Guns||See Chart in Instruction Manual|
|Typical Flow Rate of Flat Pattern Guns||See Chart in Instruction Manual|
|Maximum Fluid Temperature||200°F|
|Air Inlet Size||1/4 npt Quick Disconnect Nipple|
|A Component (ISO) Inlet Size||-5 JIC; 1/2-20 UNF|
|B Component (Resin) Inlet Size||-6 JIC; 9/16-18 UNF|
|Sound Pressure||81.1 dB(A), using AR5252 at 100 psi
(0.7 MPa, 7 bar)
|Sound Power, Measured per ISO 9416-2||81.1 dB(A), using AR5252 at 100 psi
(0.7 MPa, 7 bar)
|Dimensions||7.5 x 8.1 x 3.3 in|
|Wetted Parts||Aluminum, stainless steel, carbon steel,
carbide, chemically resistant o-rings