Fusion Mechanical Purge Spray Foam Gun

Arrow
Arrow
Slider

The Fusion Mechanical Purge Spray Foam Gun

The Fusion Mechanical Purge Spray Gun is great if you’re spraying polyurea coatings or spray foam insulation.  Its rugged design provides excellent mix and material properties – giving you great results at the job-site.

Features:

  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities
Fusion Mechanical Purge Spray Gun
Maximum Fluid Working Pressure 3500 PSI
Minimum Air Inlet Pressure 80 PSI
Maximum Air Inlet Pressure 130 PSI
Maximum Fluid Temperature 200°F
Air Inlet Size 1/4 npt Quick Disconnect Nipple
A Component (ISO) Inlet Size -5 JIC; 1/2-20 UNF
B Component (Resin) Inlet Size -6 JIC; 9/16-18 UNF
Typical Flow rate See Charts in Instruction Manual
Sound Pressure 70 dB(A), at 100 psi (0.7 MPa, 7 bar)
Sound Power, measured per ISO 9416–2 79.9 dB(A), at 100 psi (0.7 MPa, 7
bar)
Length 7.6 in.
Height 8.1 in.
Width 3.1 in.
Weight 2.9 lb
Wetted Parts Aluminum, stainless steel, carbon steel,
chemically resistant o-rings, ultra-high molecular
weight polyethylene (UHMWPE),
Polycarballoy™, CeramTip™